Air heaters are manufactured based on the drain and flushing of the air heater, in tanks the sedimentation is built which clog the heater and helps in reducing the efficiency of heating elements and increasing the bill of electricity. Some people don’t know how to flush a water heater, there are some necessary steps to be followed in order to drain the air heater: if you have an air heater which is a gas powered heater then switches it to the pilot then keep the heater light on but stop heating the air. If you have the electric air heater then switch off the heater and connect the heater to the electricity. Make the heat air into cool air but it takes a certain time based on the size of the air heater. Stop the cold air valve off where it is kept above the top of the air heater and pour the air before it gets heated. Some hot air may occupy in the tap so open the hot air tap in the home to release the air stored in the tap and open the pressure valve to release the pressure from the tank, while releasing the air you may hear some sound of hissing from the pipe when you turn on the valve. Using this method you can control the flow of air in the air heater and make all the heat air completely drained out from the tap.
Methods of flushing in order to drain the air heater
To flush the air from the air heater will stop the air from the air heater, in most of the homes the air heater is stored in the basement and uses the air hose to drain the air heater straight to the basement. how to flush a water heater, you can use an air hose to garden or lawn and use the mesh screen in the lawn where the cool air can be drained quickly and better and faster in the drain of air. If the air in the heater reduces below the ground level of the air and uses the pump and connects it with a garden hose and pump to drain the air outside. Use the pump to drain the air from the air heater if necessary, you can use the hose to connect the air heater directly to the drain valve and make the wrench tightly and use it to drain the air completely from the air heater. While flushing the air heater then the air will be completely meshed and if any large amount of sedimentation in the heater valve then disconnect the hose from the valve and fill the tank with air and again continue the same process of draining so that the sedimentation in the heater completely drains out. Now disconnect the garden hose and turn the pressure valve and intake of the gas and electricity is turn on and back to the normal position and now the performance of the air heater is improved and the function of the air heater is in good condition.